Skip to content
+420 777 675 051
Rental

Not sure which machine?

Josef Horák · Head of Rental

+420 777 675 051
Machinery sales

Can't find your machine? We will source it.

Petr Koutský · General Manager

+420 777 332 266Enquire about a machine
  • NTC NT 64P rammer from the front left
  • NTC NT 64P rammer from the front on grass in front of a stone wall
  • NTC NT 64P rammer from the side with the engine and protective frame

Rammer NTC NT 64P (64 kg)

Rammer, 64 kg, with a 250 mm wide shoe for backfilling narrow trenches for cables and pipes and for the areas around manholes and posts.

Operating weight
64 kg
Impact force
15 kN
Shoe size (W × L)
250 × 300 mm

from 500 CZK / day excl. VAT

605 CZK incl. VAT

Long-term rental discountReady by the second working day

Deposit 10,000 CZK

+420 777 675 051 · Josef Horák, Head of Rental

Specifications

As specified by the manufacturer and importer.

Operating weight64 kg
Impact force15 kN
Shoe size (W × L)250 × 300 mm
Impact rate650 1/min
Stroke at shoe55 mm
EngineHonda GXR 120, Stage V, with intake pre-filter
Engine power2.7 kW
Fuelpetrol
Tank capacity2.8 l
Machine dimensions (L × W × H)790 × 355 × 1,050 mm

Rental

Leave your name and phone number. We will confirm the dates and price by the next working day at the latest.

+420 777 675 051

Josef Horák · Head of Rental / Technical Sales

What would you like to rent?

Choose dates for each item. Not sure of the exact dates? No problem.

Add a machine from the online catalogue
Contact

Your name and phone number are enough. We will sort out the rest by phone.

We will confirm the dates and price by the next working day at the latest.

What the NTC NT 64P is good for

What it is for. The NT 64P compacts backfill in a narrow trench for a cable, a water or sewer service connection and drainage, and the areas around manholes, posts and foundations where a plate compactor does not fit. It also suits cohesive, loamy and clayey soils.

What it can do. The 250 × 300 mm shoe strikes 650 times a minute with an impact force of 15 kN; its stroke is 55 mm. It is powered by a Honda GXR 120 petrol engine rated at 2.7 kW with a 2.8 l tank; a pre-filter protects the engine's air intake. The shoe is made of laminated wood.

What to keep in mind. The rammer weighs 64 kg and measures 790 × 355 × 1,050 mm. Around the site you move it on its transport wheels by the handle, which can be operated with one hand; for slinging it has a central lifting point. An hour meter is fitted as standard.

Frequently asked questions

About this machine and about renting in general.

How narrow a trench will the NT 64P fit into?

The shoe is 250 mm wide, so it fits onto the bottom of a trench at least 25 cm wide. The whole machine is 355 mm wide, so the trench must not be narrower than that over the whole height of the machine.

What is the difference between the NT 64P and the NT 72P?

The NT 64P weighs 64 kg, has an impact force of 15 kN, a shoe 250 mm wide and a stroke of 55 mm. The NT 72P weighs 72 kg, has 17 kN, a shoe 285 mm wide and a stroke of 60 mm. Both have the Honda GXR 120 engine rated at 2.7 kW and 650 blows per minute.

When should I use a rammer and when a plate compactor?

The rammer concentrates the impact force of 15 kN on a 250 × 300 mm shoe, so it suits narrow trenches, the areas around manholes and loamy and clayey soils. On wider areas of gravel and sand a plate compactor is faster, for example the VD 15P with a base plate 400 mm wide.

How do I move the rammer around the site?

It has transport wheels and a handle that, according to the manufacturer, lets you move it with one hand. At 64 kg two people can load it into a car; the central lifting point is for a crane or slings.

How quickly can I rent equipment?

We keep most of our equipment in stock in Hradec Králové and usually have it ready within two working days. Smaller tools are often ready the same day – call +420 777 675 051 and we will tell you straight away.

Do you deliver equipment to the site?

Yes. We deliver straight to the site anywhere in the Czech Republic, most often around Hradec Králové and Pardubice. You can collect smaller tools from us in Hradec Králové – it is 10 minutes from Pardubice. On larger jobs, such as a roller rented for a month, delivery is included. Otherwise we work out the transport cost from the distance and the size of the machine, and tell you in advance.

Do you rent at weekends and outside opening hours?

We are open Monday to Friday, 7:00–16:00, but by arrangement over the phone we also hand over and take back equipment outside those hours. Weekend rentals are routine – just arrange them with us in advance.

Do the prices include VAT?

We quote prices excluding VAT, with the price including VAT just below in smaller type. These are starting daily rates: the final price depends on the length of the rental – for weekly and monthly rentals the rate is considerably lower. We will send you a quote straight away.

Call

Rental

What would you like to rent?

Choose from our online catalogue or tell us your requirements in your own words.

Add a machine from the online catalogue
Contact

Your name and phone number are enough. We will sort out the rest by phone.

We will confirm the dates and price by the next working day at the latest.

Prefer to call? +420 777 675 051 · Josef Horák