Skip to content
+420 777 675 051
Rental

Not sure which machine?

Josef Horák · Head of Rental

+420 777 675 051
Machinery sales

Can't find your machine? We will source it.

Petr Koutský · General Manager

+420 777 332 266Enquire about a machine
  • GÖLZ RD160 core drill with stand and FB33P motor
  • Stand of the GÖLZ RD160 core drill without the motor
  • GÖLZ FB33P motor from the RD160 core drill
  • Carriage and roller guide of the GÖLZ RD160 stand
  • Feed handle on the GÖLZ RD160 stand

Core drill GÖLZ RD160 with FB33P drill motor (up to Ø 162 mm)

Lightweight drill stand and handheld core drill set for service openings and anchoring, Ø 20–162 mm. The stand weighs 10.3 kg.

Drilling diameter
20–162 mm
Drilling stroke
520 mm
Engine
GÖLZ FB33P

from 450 CZK / day excl. VAT

545 CZK incl. VAT

Long-term rental discountReady by the second working day

Deposit 10,000 CZK

+420 777 675 051 · Josef Horák, Head of Rental

Specifications

As specified by the manufacturer and importer.

Drilling diameter20–162 mm
Drilling stroke520 mm
EngineGÖLZ FB33P
Power2.2 kW
Voltage230 V
Rotation speed / gears520 / 1,400 / 2,900 min⁻¹ (3 gears)
Core bit connection1¼″ UNC + R½″
Stand anchoringthree-point base for anchor fixing (16 mm hole)
Wet / dry drillingwet
Weight (stand / motor)10.3 / 6.5 kg

Accessories for this machine

Add what you need to your rental. We will deliver it with the machine.

  • Diamond core bitscharged according to wearprice on request

Rental

Leave your name and phone number. We will confirm the dates and price by the next working day at the latest.

+420 777 675 051

Josef Horák · Head of Rental / Technical Sales

What would you like to rent?

Choose dates for each item. Not sure of the exact dates? No problem.

Add a machine from the online catalogue
Contact

Your name and phone number are enough. We will sort out the rest by phone.

We will confirm the dates and price by the next working day at the latest.

What the GÖLZ RD160 | FB33P is good for

What it is for. The RD160 with the FB33P drill is a lightweight set for installation and anchor holes up to Ø 162 mm: service openings for water, waste and cables, or holes for anchors. The FB33P motor is a handheld core drill, so you can also drill smaller holes without the stand.

What it can do. In the stand it drills Ø 20–162 mm with a 520 mm stroke, and the column tilts continuously up to 45°. The motor is rated at 2.2 kW on 230 V and has three speeds of 520, 1,400 and 2,900 min⁻¹; you fit core bits with a 1¼″ UNC or R½″ connection. The carriage runs on a roller guide, and the motor has two spirit levels.

What to keep in mind. Drilling is wet only, so supply the motor with water. The stand has no vacuum base: you drill a 16 mm hole for the anchor plug through the base with a hammer drill and tighten the stand down on the anchor rod. The aluminium stand weighs 10.3 kg and has a carrying handle; the motor weighs 6.5 kg.

Frequently asked questions

About this machine and about renting in general.

Can I use the FB33P motor without the stand?

Yes, the FB33P is a handheld core drill. Freehand, it drills Ø 20–110 mm in concrete; in the RD160 stand, up to Ø 162 mm.

How is the RD160 stand fixed in place?

With an anchor plug in the substrate. Through the opening in the base you drill a 16 mm hole with a hammer drill, fit the plug, screw in the anchor rod and tighten the stand with the nut. You fine-tune the vertical alignment with the levelling screws on the base.

Can I drill an angled hole with it?

Yes, the stand column tilts continuously up to 45°.

How much does the set weigh?

The aluminium stand weighs 10.3 kg and has a carrying handle; the FB33P motor weighs 6.5 kg.

Do I need water for drilling?

Yes. The FB33P is intended for wet drilling only; you connect the water with a Gardena or Geka quick coupling. You will find diamond core bits among the matching accessories.

How quickly can I rent equipment?

We keep most of our equipment in stock in Hradec Králové and usually have it ready within two working days. Smaller tools are often ready the same day – call +420 777 675 051 and we will tell you straight away.

Do you deliver equipment to the site?

Yes. We deliver straight to the site anywhere in the Czech Republic, most often around Hradec Králové and Pardubice. You can collect smaller tools from us in Hradec Králové – it is 10 minutes from Pardubice. On larger jobs, such as a roller rented for a month, delivery is included. Otherwise we work out the transport cost from the distance and the size of the machine, and tell you in advance.

Do you rent at weekends and outside opening hours?

We are open Monday to Friday, 7:00–16:00, but by arrangement over the phone we also hand over and take back equipment outside those hours. Weekend rentals are routine – just arrange them with us in advance.

Do the prices include VAT?

We quote prices excluding VAT, with the price including VAT just below in smaller type. These are starting daily rates: the final price depends on the length of the rental – for weekly and monthly rentals the rate is considerably lower. We will send you a quote straight away.

Call

Rental

What would you like to rent?

Choose from our online catalogue or tell us your requirements in your own words.

Add a machine from the online catalogue
Contact

Your name and phone number are enough. We will sort out the rest by phone.

We will confirm the dates and price by the next working day at the latest.

Prefer to call? +420 777 675 051 · Josef Horák