Submersible pump Tsurumi HS2.75S (230 l/min)
230 V electric submersible drainage pump for pumping water out of excavations and manholes. Up to 230 l/min, head up to 18 m, particles up to 7 mm.
- Max. flow rate
- 230 l/min
- Max. head
- 18 m
- Solids passage
- 7 mm
from 250 CZK / day excl. VAT
303 CZK incl. VAT
Long-term rental discountReady by the second working day
Deposit 3,000 CZK
+420 777 675 051 · Josef Horák, Head of Rental
Specifications
As specified by the manufacturer and importer.
| Max. flow rate | 230 l/min |
|---|---|
| Max. head | 18 m |
| Solids passage | 7 mm |
| Discharge port diameter | 50 mm |
| Engine | electric motor, IP68, thermal protection |
| Engine power | 0.75 kW |
|---|---|
| Fuel / power supply | 230 V, 50 Hz |
| Cable length | 10 m |
| Dry weight | 19 kg |
| Dimensions (L × W × H) | 285 × 184 × 424 mm |
Rental
Leave your name and phone number. We will confirm the dates and price by the next working day at the latest.
Josef Horák · Head of Rental / Technical Sales
What the Tsurumi HS2.75S is good for
What it is for. The HS2.75S is a submersible drainage pump for pumping water out of excavations, excavation pits and manholes. It pumps water with fine contaminants: solid particles up to 7 mm and a dry-solids content of up to 10%. It is not for thick sludge or water with small stones.
What it can do. It pumps up to 230 l/min and pushes the water up to a height of 18 m; the higher the lift, the lower the flow. It is powered by a 0.75 kW electric motor on 230 V with built-in thermal protection. An agitator on the shaft prevents the pump from air-locking, and the wear parts are made of abrasion-resistant materials.
What to keep in mind. The pump measures 285 × 184 mm, is 424 mm high and weighs 19 kg; the cable is 10 m long. When running it needs a water level of at least 90 mm. The discharge port is 50 mm in diameter, and the pumped water may be 0–40 °C with a pH of 5–9.
Frequently asked questions
About this machine and about renting in general.
Is the HS2.75S a trash pump?
No, it is a drainage pump. Solid particles up to 7 mm and water with a dry-solids content of up to 10% pass through it. For thick sludge or water with small stones up to 24 mm there is the Honda WT 20 petrol-driven trash pump.
To what height will it push the water?
Up to 18 m. It delivers its maximum flow of 230 l/min at a low head; as the height increases, the flow drops.
How low can it pump the water down?
When running it needs a water level of at least 90 mm. The pump measures 285 × 184 mm and is 424 mm high.
Which socket do I plug it into?
A single-phase 230 V, 50 Hz socket. The motor has an output of 0.75 kW and a rated current of 4.8 A, and the thermal protection is built in. The cable is 10 m long.
How quickly can I rent equipment?
We keep most of our equipment in stock in Hradec Králové and usually have it ready within two working days. Smaller tools are often ready the same day – call +420 777 675 051 and we will tell you straight away.
Do you deliver equipment to the site?
Yes. We deliver straight to the site anywhere in the Czech Republic, most often around Hradec Králové and Pardubice. You can collect smaller tools from us in Hradec Králové – it is 10 minutes from Pardubice. On larger jobs, such as a roller rented for a month, delivery is included. Otherwise we work out the transport cost from the distance and the size of the machine, and tell you in advance.
Do you rent at weekends and outside opening hours?
We are open Monday to Friday, 7:00–16:00, but by arrangement over the phone we also hand over and take back equipment outside those hours. Weekend rentals are routine – just arrange them with us in advance.
Do the prices include VAT?
We quote prices excluding VAT, with the price including VAT just below in smaller type. These are starting daily rates: the final price depends on the length of the rental – for weekly and monthly rentals the rate is considerably lower. We will send you a quote straight away.


